Suspended Canopies

Street Structures were approached by Rose Builders to design, manufacture and install a glazed entrance canopy at Sheepen Road in Colchester. The works consisted of mild steel arms being fixed into internal steelwork by means of stub brackets. The Glazing is held in place using UDDL stainless steel planar glass fixings.

Street Structures Urban Design Ltd displays this large suspended canopy above its main office in Clay Cross Derbyshire. The suspended canopy is constructed of RHS decorated mild steel projecting arms which are fixed back to the existing brick work of the structure. The glass is clear toughened safety glass which is secured in place using [...]

Street Structures Urban Design completed this Suspended Canopy for a block of offices in Manchester. The Canopy is constructed of Toughened safety glass which is held in place using our standard Planar type fixings supported on mild steel framework. The Canopy is also fitted with an Aluminium Powder Coated gutter system.

Street Structures Urban Design were asked to design and install a suspended entrance canopy for a Holiday Inn express. The canopy is constructed of decorated mild steel RHS frame work fixed through the framework to the internal steelwork. The glass panels are glazed 10mm thick, clear toughened safety glass suspended beneath the framework using our [...]

Urban Design provides a large range of suspended entrance feature canopies to a large retail outlet in Cheltenham. Canopies were constructed from a decorated mild steel frame, ‘T’ section profile arms, stainless steel planar glass supports and a clear toughened safety glass.

A stainless steel and glass frameless canopy unit, comprising of two tie rods, rear fixings and laminate clear panels. Provided for an architects office in Southend.  

A modern frameless glass canopy using our unique rear support system stainless steel channel, this method alleviates the need for any visible support. Rear channels are aluminium and a stainless steel composition. A variety of glass panels can be used. The examples here are a laminate satinised glass.

A simple stylish entrance feature canopy made of stainless steel material and either toughened or laminated safety glass panels. Ideal for doorways or other areas where a simple cost effective solution is required.

A simple but cost effective curved steel frame canopy with a clear polycarbonate PETG sheet covering. Bolted to internal steel the canopy provides a simple, economical solution for a office entrance canopy.

On an exposed pier in south Wales, a mild steel framework with planar fittings and curved toughened safety glass.

A mild steel support framework resin bolted to external brickwork with tension rod support wires. This unit was set with one arm raised slightly above the other to allow water to run off one edge. However this unit can be provided with either a tilted or a flat glass panel to suit your individual requirements. [...]

A series of frameless glass canopies provided by Urban Design for a mobility company on Chelmsford business park comprising of toughened satinised safety glass panels fixed using only minimal stainless steel support tie rods and fixings. This type of canopy can provide an economical solution for any area but care must be taken over the [...]

Urban Design provided on a retail park outlet in Bexhill a series of running fully fabricated decorated mild steel canopy structures. All canopies had laser profiled arms fixed back to internal steelwork (isolated using neoprene gaskets and seals to prevent bi metallic reactions) with an integral rear aluminium powder coated gutter channel system and suitable [...]

Urban Design & Developements Ltd provide a range of minimalist canopy designs as part of the glass profil 24 range used widely across europe over the past 5 years and now available in the UK through Urban Design. With no other visible support than a rear fixed channel the Glass Profil 24 range give a [...]

A simple but cost effective solution to a client requiring a urgent entrance door canopy unit. Stainless steel fixings and toughened safety glass were produced and isntalled to a very tight time scale. Contact our sales department for more details of frameless glass canopy units.

A economical design of a suspended toughened safety glass canopy unit, with box section mild steel framework, stainless steel tension rods and a rear gutter section. Glass panels were supported from the framework by stainless steel planar type fixings. All steelwork was decorated to the clients chosen colour using a high build exterior grade wet [...]

A fully fabricated stainless steel dull polished framed suspended canopy to a prestige development in Brighton. High grade steel had to be used due to the close proximity of the site to the sea. Glass covering was provided by the use of clear toughened safety glass panels held in a stainless steel planar type arrangement. [...]

Part of our economy range of frameless canopies. A unit supplied and installed to a Hospital in Cheshire with stainless steel fittings and gutter along with toughened safety glass panels. For more details of our economy range of canopies for all conditions please contact our sales department on 01246 862319.

A small economy suspended canopy comprising of mild steel arms and rolled members with a roof covering of polycarbonate UV protected sheeting.

Working once again for a well known Supermarket chain Urban Design provided running glass canopy structures to many areas of the store, including the main entrance area. Combining polyester powder coated bespoke aluminium patent glazing bars and toughened safety glass panels, with all main and secondary steelwork the store was completed on schedule. All steelwork [...]

A simple effective and economical frameless style glazed canopy unit to a prestige office development in central London. Using our standard components and stainless steel rear gutter cahnnel we were able to install the canopy within a very tight time scale. For the full range and extent of frameless canopies we offer please contact our [...]

A decorated mild steel framework with a front runner rail of stainless steel, fixed back to a rear PFC channel section which was part of the main steel framework for the building. Glazing to the roof area was provided by using clear toughened safety glass panels securely fixed in a stainless steel planar type fixing [...]

A full mild steel support framework comprising of RHS projecting arms and cross members were taken back and fixed to the internal steel framework. All items were fully decorated using a heavy duty exterior grade enamel high gloss paint system. Glazing to the roof area was provided by the use of clear toughened safety glass [...]

A simple effective and economical series of frameless style glazed canopy units to a housing development in Cardiff. Using our standard components we were able to install the canopies in a very tight time scale. For the full range and extent of frameless canopies we offer please contact our technical sales department

A simple frameless style glass canopy to an office development in Portsmouth. The rear gutter provided a feature for the canopy with extra oversize projecting stub brackets and stainless steel tension rod cables providing essential stability of the completed unit.

Urban Design provided an private development with a cost effective simple frameless style glass canopy units to several entrance areas. Fixings for the canopy were entirely of stainless steel with toughened glass safety panels. The glass panels were specifically measured and cut to the rear edge to accommodate the shaped rear features. For details of [...]

Urban Design provided an food outlet with a cost effective simple frameless style glass canopy unit. Fixings for the canopy were entirely of stainless steel with toughened glass safety panels. For details of our full range of frameless style economy canopies please contact our sales department.

Urban Design provided an office development in Hull with a large unsupported canopy unit fixed through the curtain walling sections to internal steelwork. The curtain walling contractor fixed the external screens around the slim projecting laser cut fin arm sections. Glass panels were of toughened clear safety glass fixed using planar type stainless steel fixing [...]

Urban Design were requested to provide a series of both radial and straight canopies to an office development in Brighton. The canopies followed a standard theme of projecting mild steel CHS arms with clear toughened safety glass panels and stainless steel planar type glass fixing supports.

A full mild steel support framework taken back and resin anchor bolt fixed to the external brickwork face. To provide extra support and rigidity a series of stainless steel rods were fixed to the front edge of the canopy and to the main structure at a higher level. All items were fully decorated using a [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basic design for this attractive individual canopy unit. Support tension rods gave extra stability to the design. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basis of a several feature canopy units on a prestigious development. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by [...]

A full mild steel CHS support framework fixed securely to internal steel and fully decorated using a heavy duty exterior grade enamel high gloss paint system. Glazing to the roof area was provided by the use of flat toughened satinised safety glass panels laid in a faceted arrangement around the curvature of the rolled steel [...]

Comprising of Glass toughened safety glass panels held in a polyester powder coated aluminium patent glazing bar system fixed over a mild steel decorated sub frame fixed through stub brackets to the internal steel frame of the main structure. Extra stability was provided by the use of stainless steel tie rods fixed to the main [...]

A traditional and economical solution to the requirements for a functional running feature canopy to a retail outlet in Warminster. A mild steel framework with laser profiled support arms fixed back to the main internal steel structure all fully decorated using a heavy duty exterior grade high gloss enamel paint system. Glazing to the roof [...]

A series of frameless glass canopies provided by Urban Design for a prestigious office development in London comprising of toughened satinised safety glass panels fixed using only minimal stainless steel support tie rods and rear fixing straps. The canopies sloped slightly forward to avoid the need for any rear drainage system. This type of canopy [...]

A series of frameless glass canopies provided by Urban Design for a hospital office in Wakefield comprising of toughened clear safety glass panels fixed using only minimal stainless steel support tie rods and rear fixing bolt stubs. The canopies sloped slightly forward to avoid the need for any rear drainage system. The scheme comprised of [...]

A simple but effective anti sun grey toughened safety glass suspended canopy unit for a hospital office entrance in Bury. Mild steel decorated arms were bolted to the exterior face with extra support provided by the use of stainless steel tension rods. Glass panels were fixed using stainless steel planar type fittings and a rear [...]

A full stainless steel support frame with rear integral stainless steel gutter, singular downpipe and stainless steel planar type glass support fittings. Glass panels were of clear laminate toughened material. Fixed directly to stone the canopy provided a smart attractive feature to a well know bank chains offices.

A full stainless steel CHS support frame with stainless steel planar type glass support fittings. Glass panels were of clear laminate toughened material. Fixed through front plates on the outer wall to the main internal steelwork using stub brackets to give the required support. The small but functional canopy provided a prestigious banks offices with [...]

Urban Design created a unique curved suspended glass canopy to the front of an office development in Birmingham using decorated mild steel laser profiled fin arms fixed back to internal steelwork and clear toughened safety glass on a stainless steel planar type fixing arrangement. The glass canopy framework was decorated using our standard heavy duty [...]

Urban Design created a suspended glass canopy to the front of a regional post office using decorated mild steel box section fin arms and satinised toughened safety glass on a stainless steel planar type fixing arrangement. The glass canopy framework was decorated using our standard heavy duty exterior grade paint system and glass panels had [...]

A very simple but striking feature canopy to an office development in Cheam formed using a small semi-circular canopy in rolled decorated mild steel members with curved front edge clear toughened safety glass panels, supported using stainless steel type planar support brackets and stainless steel tie rods giving extra uplift strength.

A fully suspended glazed canopy unit with steel supports built into the side brickwork walls. Glazing was by the use of clear toughened safety glass panels held in a stainless steel planar type arrangement. There were no gutters or drainage to the canopy. The design provided a unique style of entrance feature to a development [...]

A frameless glass canopy provided by Urban Design for an hospital office in Wakefield comprising of toughened clear safety glass panels fixed using only minimal stainless steel support tie rods and rear fixing bolt stubs. The canopy sloped slightly forward to avoid the need for any rear drainage system. This type of canopy can provide [...]

A decorated mild steel support frame fixed back through external cladding to internal steel member’s. With glazing of underslung toughened safety glass panels held using stainless steel planar type fixing bolts and complete with stainless steel tie rod members for additional support fixed to the front edge of the canopy and to the main building [...]

A minimal style entrance canopy feature incorporating mild steel support frame and toughened underslung safety glass clear panels. The rear integral gutter channel acted as a support beam with additional support achieved by the use of stainless steel tie rod connectors.

A simple but effective entrance feature comprising of a decorated mild steel support frame which was bolted back to the existing building face, with extra support created by the use of two stainless steel tension rods. A rear gutter and single downpipe outlet completed the deisgn.

Urban Design created a series of suspended canopy units for a retail outlet in Manchester. The projecting laser cut profiled arms had to be taken back to internal steel supports and the front cladding panels cut around the arms to give a neat finish. Glass to the units was provided by using toughened clear safety [...]

A unique style of glass canopy which relies on support from the rear gutter channel and two stainless steel tie rod connectors. Using a single piece of clear toughened safety glass held in stainless steel stub brackets and planar type supports fixed to the existing building face a modern and economical solution was provided for [...]

Urban Design were asked to manufacture and install a planar type glass canopy arrangement directly to a alumnium curtain walling system provided by another sub contractor. The curtain walling system was strengthend by the manufacturer and the design calcualtions carried out by their structural engineer due to the numerous complexities and potential design issues with [...]

Urban Design created a unique shape suspended glass canopy to the front of a health centre clinic using decorated mild steel laser profiled fin arms and clear toughened safety glass on a stainless steel planar type fixing arrangement. The glass canopy framework was decorated using our standard heavy duty exterior grade paint system and glass [...]

A patent glazed entrance suspended canopy unit with a full mild steel support framework fixed back to the main internal steel framework of the building and fully decorated using a heavy duty external grade enamel high gloss paint system. Glazing panels were of clear toughened safety glass held in place using a polyester powder coated [...]

A fully decorated glass entrance canopy unit with mild steel support arms fixed back to both rear and side masonry with resin anchor fittings. The glass canopy unit was complete with stainless steel planar type fittings holding clear toughened safety glass panels. To the front edge of the canopy and fixed back to the main [...]

A suspended decorated mild steel glazed canopy unit comprising of projecting arms laser cut plates with shaped ends which were bolted back to a internal steel horizontal beam. Glass panels of clear toughened safety glass were supported above the projecting arms by the use of stainless steel planar type fixings. The glass roof panels were [...]

A unique glazed suspended entrance canopy feature on an office in Cheltenham. The framework to the glazed canopy was formed using a combination of CHS roiled members and profiled laser cut flat plates. The glass panels were cut and shaped with a radius front edge to give the glazed canopy unit a special edge feature. [...]

Urban Design provided a whole series of glazed entrance canopy features on a industrial park in Tamworth. The canopies were formed using projecting SHS members with variable height glazing supports used to create a natural apex form for the glass. This allows for side drainage of any rainwater and the central apex joint was sealed [...]

A fully decorated mild steel support framework with laser profiled projecting arms, fixed back to internal steelwork provided the basic design for this attractive individual glass canopy unit. Stainless Steel support tension rods gave extra stability to the design. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which [...]

A unique glass canopy unit in which the glass panels were shaped in a faceted manner around the curvature of the external edge of the canopy. Comprising of a fully decorated mild steel framework this patent glazed glass canopy unit was fixed back directly to internal steel running members. Glazing was provided by the use [...]

A suspended decorated mild steel canopy unit comprising of projecting arms laser cut plates with shaped ends which were bolted back to a rear running channel section. Glass panels of clear toughened safety glass were supported above the projecting arms by the use of stainless steel planar type fixings. The projecting arms were fixed together [...]

A suspended decorated mild steel canopy unit comprising of projecting arms laser cut plates with shaped ends. To reduce lateral movement a running chs member joined the arms together. Glazing panels were of toughened safety glass in a satinised material, supported above the framework using stainless steel planar type fixings. A rear gutter polyester powder [...]

A suspended decorated mild steel canopy unit comprising of projecting arms of SHS sections which had fully welded and sealed ends. The arms were bolted back to the internal steel framework by the use of stub brackets. Clear toughened safety glass panels were supported from beneath the frame (under slung) with stainless steel planar type [...]

A suspended decorated mild steel canopy unit comprising of projecting arms of SHS sections which had fully welded and sealed ends. The arms were bolted back to the internal steel framework by the use of stub brackets. Clear toughened safety glass panels were supported from the frame with stainless steel planar type fixings. To ensure [...]

A suspended decorated mild steel canopy unit with projecting laser cut fins arms fixed to a rear running channel support section. With clear toughened safety glass panels supported from the frame with stainless steel planar type fixings. Extra support was provided by the sue of tension rods fixed to the front edge of the canopy [...]

A CHS fabricated gusset lattice framework provides excellent support for a steep pitch forward sloping canopy unit, whilst providing a unique entrance feature. Glass panels were toughened clear safety glass supported off the framework by the use of stainless steel planar type fixings and steel support stubs. A rear polyester powder coated flashing to the [...]

A simple CHS decorated framed canopy unit with singular toughened safety glass panel supported above the framework using stainless steel planar type fixings. The canopy sloped gently forwards to assist with rainwater dispersal and avoid the need for a rear gutter channel. The project involved several similar units on a large industrial estate.

A traditional and economical solution to the requirements for a functional running feature canopy. A mild steel framework with laser profiled support arms fixed back to the main internal steel structure all fully decorated using a heavy duty exterior grade high gloss enamel paint system. Glazing to the roof area is by the use of [...]

A simple but effective clear glass panel suspended under a stainless steel box frame using planar type fixings. Extra support was provided by a pair of stainless steel tie rods fixed to the canopy and to the main structure at a higher level.

A clear glass suspended canopy for a leading supermarket chain. The main support frame of decorated mild steel was fixed back to internal supports within the main structure. Glazing to the roof area was by the use of clear toughened safety glass held in a stainless steel planar arrangement. All steelwork items were fully decorated [...]

A fully decorated mild steel CHS framework including under fix style gallows brackets to give extra support and stability. Glazing to the roof area was created using clear toughened safety glass panels securely fixed in a stainless steel planar type fixing arrangement and an aluminium sealed flashing was used at the glazing and brickwork intersection. [...]

When a client had a high level glazing problem to solve he came to Urban Design. The top level of a 4 storey apartment block required glazed rain screen canopies to the apartment walkways. This was achieved using mild steel decorated frames with polyester powder coated glazing bars and toughened safety glass to the specification [...]

An economical solution to a requirement for numerous matching office entrance canopies. A mild steel fully decorated sub frame fixed back to internal steelwork supporting glass roof panels of clear toughened safety glass on a stainless steel planar type arrangement. Canopies sloped slightly forward to avoid the need for any drainage system. All steelwork was [...]

Urban Design & Developments provided running suspended canopies for a large retain outlet in Hull. The canopies comprised of laser profiled mild steel projecting arms fixed back to internal steel frames, with a front running gutter channel, stainless steel planar type fittings and clear toughened safety glass panels.

A very simple but effective decorated mild steel and toughened safety glass canopy giving a prominent feature to the entrance of a show home sales office in Yeovil. Glass panels were held in place using our planar style fixings with mild steel CHS arms and SHS runners.

A simple but effective decorated mild steel canopy unit with toughened safety glass glazing on planar type fixings and with extra tension wire support rods.

A fully decorated mild steel support framework fixed back to internal steelwork provided the standard design for numerous canopy units on the above project. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by the [...]

A fully fabricated stainless steel canopy structure with laser profiled arms fixed back to internal steelwork (isolated using neoprene gaskets and seals to prevent bi metallic reactions) with an integral rear stainless steel gutter and suitable CHS down pipes. Tie rods provided extra stability to the canopy structure. Roof covering was provided by the use [...]

A fully fabricated stainless steel canopy structure with laser profiled arms fixed back to internal steelwork (isolated using neoprene gaskets and seals to prevent bi metallic reactions) with an integral rear stainless steel gutter and suitable CHS down pipes. Roof covering was provided by the use of satinised toughened safety glass panels fixed in a [...]

Decorated mild steel laser profiled ‘T’ section arms were fixed back to a running rear PFC channel member which was in turn fixed to the internal steelwork within the main building. Glazing to the roof area was provided by using clear toughened safety glass panels securely fixed in a stainless steel planar type fixing arrangement. [...]

A fully decorated mild steel support framework fixed back to internal steelwork with flat glass panels. The roof covering was provided by the use of satinised toughened safety glass panels fixed in a stainless steel planar type system. Panels were specifically shaped to form a true front edge curve to the canopy. All steelwork was [...]

A fully decorated mild steel support framework fixed back to internal steelwork with flat glass panels under slung from the main framework. A series of tension rods provided extra fixing stability and rear integral gutter system provided drainage for the canopy. The roof covering was provided by the use of clear toughened safety glass panels [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basic design for this attractive individual canopy unit. Support tension rods gave extra stability to the design. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL [...]

A fully decorated mild steel support framework of SHS/RHS members fixed back to internal steelwork provided the basic design various canopy units on a riverside development in Sheffield All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering [...]

A fully decorated mild steel support framework and laser profiled arms resin bolted to external brickwork with tension rod support wires. The unit shown was tilted with one arm slightly lower than the other to allow water to run off one side edge of the canopy as required by the client. However this unit can [...]

A fully decorated mild steel support framework and laser profiled arms fixed back to internal steelwork with stub bracketry provided the design for this attractive running canopy structure. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. The roof [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basic design for this attractive individual canopy unit. Support tension rods gave extra stability to the design. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basic design for this economical canopy unit. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by the use of clear [...]

A fully fabricated stainless steel canopy structure with laser profiled arms fixed back to internal steelwork (isolated using neoprene gaskets and seals to prevent bi metallic reactions) with an integral rear stainless steel gutter and single CHS downpipe. Roof covering was provided by the use of clear toughened safety glass panels fixed in a stainless [...]

A fully decorated mild steel support framework fixed back to internal steelwork with flat glass panels faceted and fixed around the curved rolled roof members. Roof covering was provided by the use of clear toughened safety glass panels fixed in a stainless steel planar type system. All steelwork was fully decorated using our standard heavy [...]

A fully decorated mild steel support framework fixed back to internal steelwork with flat glass panels faceted and fixed around the curved rolled roof members. Roof covering was provided by the use of clear toughened safety glass panels fixed in a stainless steel planar type system. All steelwork was fully decorated using our standard heavy [...]

A fully fabricated stainless steel canopy structure with laser profiled arms fixed back to internal steelwork (isolated using neoprene gaskets and seals to prevent bi metallic reactions) with gallows bracket CHS supports. Roof covering was provided by the use of clear toughened safety glass panels fixed in a stainless steel planar type system and glazing [...]

A fully fabricated stainless steel canopy structure with laser profiled arms fixed back to internal steelwork (isolated using neoprene gaskets and seals to prevent bi metallic reactions) with an integral rear stainless steel gutter and suitable CHS down pipes. Roof covering was provided by the use of satinised toughened safety glass panels fixed in a [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basic design for this attractive individual canopy unit. Support tension rods gave extra stability to the design. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basic design for various canopies on this office development park. Support tension rods gave extra stability to the design. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basic design for this attractive individual canopy unit. Support tension rods gave extra stability to the design. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL [...]

A fully decorated mild steel support framework resin anchor fixed to existing facade with additional tie rod support for extra stability. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by the use of clear [...]

A fully decorated mild steel support framework fixed back to internal steelwork with flat glass panels faceted formed to a steep incline back towards the building to give clearance to passing vehicles. A series of tension rods provided extra fixing stability. The roof covering was provided by the use of clear toughened safety glass panels [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basic design for this attractive individual canopy unit. Support tension rods gave extra stability to the design. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL [...]

A fully decorated mild steel support framework of SHS/RHS members fixed back to internal steelwork provided the basic design various canopy units on a riverside development in Sheffield All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering [...]

A fully decorated mild steel support framework resin anchor fixed to existing facade with additional tie rod supports for extra stability. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by the use of clear [...]

A fully decorated mild steel support framework fixed back to internal steelwork. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by the use of clear solid UV protected polycarbonate sheets fixed using aluminium glazing [...]

A fully decorated mild steel support framework fixed back to internal steelwork with additional tie rod supports for extra stability. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by the use of clear solid [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basic design for numerous canopy units on the above project. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by the [...]

A fully decorated mild steel support framework with laser profiled arms fixed back to internal steelwork provided a small cantilever style suspended canopy unit to a small office entrance. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided a small cantilever style suspended canopy unit to a small office entrance. Extra stability was provided by the use of a single tension rod connector. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is [...]

A fully decorated mild steel support framework fixed back to internal steelwork and running horizontal beams provided the basis of a variety of suspended canopy units around a large retails area in Kings Lynn. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard [...]

A fully decorated mild steel support framework fixed back to internal steelwork and running horizontal beams provided the basis of a variety of suspended canopy units around a large retails area in Kings Lynn. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basis of a large cantilever suspended canopy to the school building. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basis of a large cantilever suspended canopy to the store frontage. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basis of a large cantilever suspended canopy to the store frontage. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by [...]

A fully decorated mild steel support framework fixed back to internal steelwork provided the basic design for various matching canopy units on the above project. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by [...]

A full stainless steel support framework fixed back to internal steelwork provided the basic design for numerous canopy units on the above project. Roof covering was provided by the use of clear toughened safety glass panels fixed in a stainless steel planar type system, panels were under slung from the main frame. An Integral rear [...]

Decorated mild steel arms were resin anchor bolted to the existing face of the structure to provide the sub framework for the canopy. Clear glazing panels of toughened safety glass held in a stainless steel planar type fixing system and a rear gutter channel completed the design.

Decorated mild steel, laser profiled support arms carry a planar type glazing system with clear toughened safety glass panels. Arms were fixed back to a main horizontal support beam which in turn is connected back to internal steelwork. A internal rear gutter drainage system completed the design and the client chose a dark RAL colour [...]

Comprising of a fully decorated mild steel framework, fixed back to internal steelwork by the use of stub bracketry and with tie rod tension supports. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided by [...]

Comprising of a fully decorated mild steel framework, fixed back to internal steelwork by the use of stub bracketry and complete with tie rod tension supports. All steelwork was fully decorated using our standard heavy duty exterior grade enamel paint system, which is available in any standard BS or RAL colour. Roof covering was provided [...]

Comprising of a fully galvanised mild steel framework, fixed back directly to internal steel running members. Glazing was provided by the use of clear toughened safety glass panels supported in a stainless steel planar type system which was isolated using neoprene gaskets and washers.

Designed with minimal fittings the canopies comprised of clear toughened safety glass panels fixed to an existing stone wall using planar type fittings and tension rods. Tension rods were resin anchor fixed to the wall.

A decorated mild steel framework from CHS material designed to form a large triangulated entrance canopy unit. Glazing to the canopy was provided by clear toughened safety glass fixed in a stainless steel planar type system. All steelwork was decorated using our heavy duty exterior grade paint system. A rear integral gutter and down pipes [...]

Comprising of a fully decorated mild steel framework, fixed back directly to internal steel running members. Glazing was provided by the use of clear toughened safety glass panels supported in an aluminium polyester powder coated patent glazing bar system. A rear gutter and down pipe completed the design.

Decorated mild steel support arms resin anchor fixed to the external building face. Complete with stainless steel planar type fittings holding clear toughened safety glass panels. To the front edge of the canopy and fixed back to the main structure at a higher level, to give additional bracing, are stainless steel tie rod anchors. To [...]

Decorated mild steel projecting arms fixed back to an internal steel beam and with enlarged face fixing plates to cover the connection through the external cladding face material. The roof covering is of solid UV protected polycarbonate clear sheeting fixed to the main steel frame using aluminium glazing straps and neoprene seals to provide a [...]

Decorated mild steel projecting arms resin anchor fixed to external brickwork provided the support for the canopy covering of clear toughened safety glass panels laid in a faceted manner ,to provide a economical solution to the curved requirements, and securely held in place using stainless steel planar type fixings. To give additional support fixed to [...]

As part of the main wall structure a seating area was covered with a toughened glass glazed canopy unit. The main support arms were fixed to the internal wall steel support frame and the glass was held in place using an aluminium polyester powder coated glazing bar system. All steelwork was decorated in a heavy [...]

Decorated mild steel support arms fixed back to internal steel for rigidity. Complete with stainless steel planar type fittings holding clear toughened safety glass panels. To the front edge of the canopy and fixed back to the main structure at a higher level, to give additional bracing, are stainless steel tie rod anchors. To the [...]

Decorated mild steel support arms fixed back to internal steel for rigidity. Complete with stainless steel planar fittings holding blue tinted toughened safety glass panels in a unique triangular arrangement. To the rear of the canopy is a rear hidden gutter channel.

A suspended steel framework fixed back to internal steel supports, complete with a glazed roof covering of toughened clear safety glass panels held in place using stainless steel planar type fixings. Extra support was provided by stainless steel tension rods fixed to the front edge of the canopy and to the building at a higher [...]

Decorated mild steel support arms fixed back to internal steel for rigidity. Complete with stainless steel planar fittings holding clear toughened safety glass panels in a unique offset arrangement.

Decorated mild steel projecting arms fixed to the internal steel frame provided the support for the canopy. Complete with a roof covering of clear toughened safety glass panels laid in a faceted manner and securely held in place using stainless steel planar type fixings. To give additional support fixed to the front edge of the [...]

Decorated mild steel support arms resin anchor fixed to the external brickwork face. The roof covering was provided by the use of a heavy duty polyester powder coated aluminium solid sheet panel. All steelwork was decorated using a heavy duty exterior grade enamel gloss paint system.

Decorated mild steel support arms fixed back to internal steel for rigidity. Complete with stainless steel planar type fittings holding clear toughened safety glass panels. To the front edge of the canopy and fixed back to the main structure at a higher level, to give additional bracing, are a series of stainless steel tie rod [...]

A heavy duty industrial style feature canopy of decorated mild steel fixed back to internal steel supports and complete with tension rods support cables. All steelwork was decorated using an exterior grade heavy duty high gloss enamel paint system. Glazing panels of toughened safety glass were supported from the main framework by the use of [...]

A traditional and economical solution to the requirements for a functional running feature canopy. A mild steel framework with laser profiled support arms fixed back to the main internal steel structure all fully decorated using a heavy duty exterior grade high gloss enamel paint system. Glazing to the roof area is by the use of [...]

A full mild steel support framework was provided with laser profile T section arms fixed back to the main building internal steel framework and which was decorated using a heavy duty external grade enamel high gloss paint system. Glazing panels of clear toughened safety glass were provided to the roof area using a polyester powder [...]

A full stainless steel support framework was resin anchor bolt fixed to the external building face. To provide extra support and rigidity stainless steel tie rods were fixed to the front edge of the canopy and to the main structure at a higher level. Glazing to the roof area was provided by the use of [...]

A full mild steel support framework fixed back to the internal steel frame of the building and decorated using a heavy duty external grade enamel high gloss paint system. Glazing panels were supported under the main framework using stainless steel planar type fixings and glazing panels were of anti sun grey toughened safety glass. [...]

A full mild steel support framework fixed back to the internal steel frame of the building and decorated using a heavy duty external grade enamel high gloss paint system. Glazing panels were clear toughened safety glass held in place using a aluminium polyester powder coated glazing bar system complete with all seals and gaskets for [...]

A supporting framework of satin finish stainless steel material throughout all fixed back to heavy duty internal steelwork. Extra support was provided by the use of stainless steel rod connectors both above and below the canopy unit. Glazing to the canopy was provided by the use of satinised toughened safety glass panels held in a [...]

Decorated mild steel laser profiled support arms fixed back to internal steel members with a roof covering of satinised toughened safety glass panels held in place using stainless steel planar type fixings and brackets. All steelwork decorated in a heavy duty exterior grade metallic enamel paint system.

A full stainless steel CHS support framework fixed securely to internal steel frames with additional supports provided by the use of solid stainless steel rods fixed to the front edge of the canopy and to the structure at a higher level. Glazing to the roof area in a under slung arrangement was created using satinised [...]

A full mild steel CHS support framework fixed securely to internal steel and fully decorated using a heavy duty exterior grade enamel high gloss paint system. Glazing to the roof area was provided by the use of flat toughened safety glass panels laid in a faceted arrangement around the curvature of the rolled steel roof [...]

A full mild steel support framework taken back and fixed to internal steel frames within the main structure. All items were fully decorated using a heavy duty exterior grade enamel high gloss paint system. Glazing to the roof area was provided by the use of clear toughened safety glass panels under slung from the main [...]

A full mild steel support framework taken back and resin anchor bolt fixed to the external brickwork face. To provide extra support and rigidity a series of stainless steel rods were fixed to the front edge of the canopy and to the main structure at a higher level. All items were fully decorated using a [...]

A full stainless steel SHS and RHS support framework was resin anchor bolt fixed to the external building face. To provide extra support and rigidity a stainless steel tie rod was fixed to the front edge of the canopy and to the main structure at a higher level. Glazing to the roof area was provided [...]

A full mild steel support framework taken back and fixed to internal steel frames within the main structure. All items were fully decorated using a heavy duty exterior grade enamel high gloss paint system. Glazing to the roof area was provided by the use of clear toughened safety glass panels under slung from the main [...]

A fully decorated mild steel CHS framework including under fix style gallows brackets to give extra support and stability. Glazing to the roof area was created using clear toughened safety glass panels securely fixed in a stainless steel planar type fixing arrangement and an aluminium sealed flashing was used at the glazing and brickwork intersection. [...]

A supporting framework of satin finish stainless steel material throughout all fixed back to heavy duty internal steelwork. Extra support was provided by the use of stainless steel rod connectors both above and below the canopy unit. Glazing to the canopy was provided by the use of satinised toughened safety glass panels held in a [...]

Designed with a rolled wave effect front CHS member, the main support frame of decorated mild steel was fixed back to internal supports within the main structure. Glazing to the roof area was by the use of clear toughened safety glass held in a stainless steel planar arrangement. All steelwork items were fully decorated using [...]

A full mild steel support framework comprising of a rear support beam and laser profiled arms was fixed back by resin anchor fixings to the existing building façade. Extra rigidity was provided by the use of stainless steel rods connected to the front edge of the canopy and to the main building at a higher [...]

A full mild steel support framework taken back and fixed to internal steel frames within the main structure. All items were fully decorated using a heavy duty exterior grade enamel high gloss paint system. Glazing to the roof area was provided by the use of clear toughened safety glass panels under slung from the main [...]

A full mild steel support framework taken back and fixed to internal steel frames within the main structure. All items were fully decorated using a heavy duty exterior grade enamel high gloss paint system. Glazing to the roof area was provided by the use of clear toughened safety glass panels under slung from the main [...]

A full mild steel support framework taken back and fixed to internal steel frames within the main structure. All items were fully decorated using a heavy duty exterior grade enamel high gloss paint system. Glazing to the roof area was provided by the use of clear toughened safety glass panels under slung from the main [...]

A series of RHS and SHS decorated mild steel arms were resin anchor bolted to the main building structure with a front runner rail to prevent lateral movement. Glazing to the roof area was provided by using clear toughened safety glass panels securely fixed in a stainless steel planar type fixing arrangement. A rear aluminium [...]

Decorated mild steel laser profiled T section arms were fixed to the internal steelwork within the main building. A full perimeter fascia screen was added to the front and sides of the glazed area. Glazing to the roof area was provided by using clear toughened safety glass panels securely fixed in a stainless steel planar [...]

A decorated mild steel framework with a steep incline towards the main structure with laser profiled shaped arms fixed back to the main internal steel frame. Glazing to the roof area was provided by using clear toughened safety glass panels securely fixed in a stainless steel planar type fixing arrangement and additional support was provided [...]

Decorated mild steel laser profiled T section arms were fixed back to a running rear PFC channel member which was in turn fixed to the internal steelwork within the main building. Glazing to the roof area was provided by using clear toughened safety glass panels securely fixed in a stainless steel planar type fixing arrangement. [...]

Decorated mild steel laser profiled T section arms fixed back to internal steelwork within the main building. Glazing to the roof area was provided by using satinised toughened safety glass panels securely fixed in a stainless steel planar type fixing arrangement. The panels were flat but with a curved front edge to highlight the shape [...]

A full mild steel SHS/RHS support framework fixed securely to internal steel and fully decorated using a heavy duty exterior grade enamel high gloss paint system. Glazing to the roof area was provided by the use of satinised toughened safety glass panels and which were securely fixed in place using stainless steel planar type fixing [...]

A decorated mild steel framework with laser profiled shaped arms fixed back to a horizontal steel frame. Glazing to the roof area was provided by using clear toughened safety glass panels securely fixed in a stainless steel planar type fixing arrangement. All steelwork was decorated in a heavy duty exterior grade high gloss enamel paint [...]